How to Inspect & Replace Windshield Wipers on a Porsche Boxster, Cayman, & 911 (2012-2019)

Maintenance Interval 1 Year
Estimated Dealer Cost $150
Estimated Independent Mechanic Cost $100
Estimated DIY Cost $50
Repair Time 0.1 hours
DIY Difficulty Easy

Windshield wipers are a key safety item on your vehicle that you shouldn’t neglect. Over time, the rubber degrades, which reduces your wiper blades’ effectiveness. To inspect your windshield wipers, lift up the wiper blade arms and take a close look at the rubber blades. If you see cracking, fraying, and/or distortion, that is a good sign your wiper blades need to be replaced. Additionally, if you get streaking, squeaking, or just find your wiper blades ineffective, you should consider replacement.

If you need to replace your windshield wipers on your Porsche, don’t worry about taking it to the dealer. Like any normal car, this is a super easy DIY. For an overview of the replacement procedure, check out the above video from the YouTube channel, RANDOMFIX. While the video covers the procedure for a Porsche 981 Cayman / Boxster, the procedure is exactly the same on the Porsche 718 Cayman / Boxster and 911 (991).

In addition, it is important that you purchase the RIGHT windshield wiper blade replacements for your Porsche. Unlike most generic windshield wiper blades, Porsche wiper blades are slightly curved to match the curvature of the windshield. Check out the recommend part below for a great deal on an exact-fit, set of Porsche wiper blades.

Find a Recommended Mechanic
Step-by-Step Instructions:

Step 1: Ensure you have the correct replacement windshield wipers.

  • Inspect your new windshield wiper blades and ensure they are identical to your existing wiper blades.
  • Pay close attention to the shape and width of the replacement blades in addition to the wiper arm adapter design.
  • Remove the new windshield wipers from their packaging.

Step 2: Replace each front windshield wiper blades.

  • Raise the driver side wiper arm and locate a square button on the arm bracket.
  • Press the button with your finger and slide the wiper out with other hand.
  • Install the new wiper blade by sliding it into the arm bracket. You should hear a click as the square button pops into place.
  • Repeat these steps for the passenger side.

Step 3: If applicable, replace the rear windshield wiper blade.

  • If your vehicle has a rear wiper blade, you can follow the same instructions for the front windshield wiper blades.
  • However, to disengage the wiper blade, you need to squeeze two plastic tabs together, then twist off the wiper blade.
  • You can watch the procedure at 0:51 in the following from YouTube channel mypcblewup.

Add a Comment

Your email address will not be published. Required fields are marked *